CORMIX v7.0 Menu Controls

Project Menu:
Load	Loads a previously saved project file(*.cmx) in the CORMIX UI. (CTRL + L)
Clear/New	Clears either the current project loaded in the UI or select pages in the UI.
Save	Saves current project loaded in the UI as a file. (*.cmx) Disabled in CORMIX v7.0E, Evaluation version.
Save As	Saves current project loaded in the UI under a different file name. (*.cmx) (CTRL + S) Disabled in CORMIX v7.0E, Evaluation version.
Print	Prints both the Session and Prediction reports for the current project, if the simulation has been run successfully. (CTRL + P) Disabled in CORMIX v7.0E, Evaluation version.
Recent Files	Maintains a list of the four most recently used files, which can be loaded into the UI by just clicking on the link provided.
Save & Exit	Saves the current project and exits CORMIX. Disabled in CORMIX v7.0E, Evaluation version.
Quit	Exits CORMIX without saving. (Ctrl + Q)
Pages Menu:
Load Page Template	Opens a window allowing the user to choose/select only particular data input and/or data output pages to be loaded into the UI as opposed to an entire project.
Clear Page Template	Opens a window allowing the user to choose/select only certain data input and/or data output pages to be cleared.
Save as Page Template	Opens a window allowing the user to choose/select only certain data input and/or data output pages to be saved. Disabled in CORMIX v7.0E, Evaluation version.
Pre-Processing Tools Menu:
Convert Input to SI Units	Converts all the input data into SI units, automatically.
Density Calculator	Provides a pop-up density-temperature-salinity calculator, i.e. density = function (Temperature, Salinity) using on of the following equations: One Atmosphere International Equation Of State of Seawater (UNESCO 1980). Fundamantals of Seawater Desalination (Appendix A Thermodynamic Properties) - El-Dessouky, Ettouny (2002)
BrineDis	Connects you to the discharge/density calculators, developed by the Enviormental Fluids Mechanics, University of Karlsruhe
Run CorHyd	Runs the CorHyd internal diffuser hydraulics application. Please review the CORMIX Feature Comparison Table for application availbility.
Load CorSpy File	Loads the discharge configuration data stored in a CorSpy (*.spy) file (output from CorSpy) into the Discharge tab of the CORMIX UI. Please review the CORMIX Feature Comparison Table for application availbility.
Run CorSpy	Visualizes the current discharge configuration as specified in the Discharge Tab in the CORMIX UI, using CorSpy. Please review the CORMIX Feature Comparison Table for application availbility.
Save CorSpy File	Saves current discharge configuration data as specified in the Discharge Tab in the CORMIX UI as a CorSpy file. (*.spy) Disabled in CORMIX v7.0E, Evaluation version. Please review the CORMIX Feature Comparison Table for application availbility.
CorData 1.0	Loads a legacy CORMIX file (*.cxc - files created in versions less than v4.1) automatically into the UI of the latest CORMIX version, v7.0. (Note: There may be some loss of data due to this conversion. Please check all your inputs before running the case.) Please review the CORMIX Feature Comparison Table for application availbility.
CorGis 2.0	CorGis is a BASINS-3.0 GIS Data Linkage tool, using Arc/View 3.2 extensions, for data export of discharge and ambient GIS data into the CORMIX UI. CorGis v2.0 uses data from the Reach File V1 and the Permit Compliance System themes available in BASINS 3.0. Detailed instructions on how to use this tool can be found at the CorGis User Guide (Installed under the /Post/CorGis directory.)
Advanced User Mode	Suppresses most warning messages for overriding data. In advanced user mode functions on toolbar default to current case or status of the data entry in the interface.
Run Menu:
Run Entire Simulation	Runs entire simulation with current input values.
Validate Inputs	Validates current inputs, if there is an error a message will appear to notify the user of the error and the data entry box causing the error will be highlighted in yellow.
Calculate Parameters	Calculates parameters from current inputs, if there is an error, a message will appear to notify the user of the error and the data entry box causing the error will be highlighted in yellow.
Classify Flows	Classifies flows from current inputs, if there is an error, a message will appear to notify the user of the error.
Output Data Reports Menu:
Current Project	Allows the user to Display, Save as Text, and Print certain/selected output reports. Once and operation in chosen (Display, Save As Text or Print), a window appears, with the following selections: Prediction File Session Report Flow Class Description Design Recommendations Processing Journal The user can decide which reports he/she would like to display, save or print. Save and Print operations are disabled in CORMIX v7.0E, Evaluation version.
Load Old Projects	Allows the user to load and view a previously saved Session Report, Prediction File or Processing Record.
Post-Processing/Advanced Menu:
CorGraph 2-D Graphics	CorGraph 2-D Graphics (LEGACY DOS graphics) has been discontinued in CORMIX This menu option NO longer exists.
CorJet Near-Field Jet Model	CorJet can be loaded in one of three ways,  -On an existing CORMIX simulation  -On a Previously saved CorJet file (*.imp).  -Or by entering input into the CorJet UI .  For addiontal info, go to the CorJet User Guide
Far-Field Locator (FFL / FFLOCATR)	CORMIX schematization of ambient cross-section data assumes a uniform far-field velocity distribution. The FFL allows users to enter actual cross-section data to account for non-uniform velocity distributions in bounded riverine environments. For more info, go to the FFL User Guide
Flow Class Tree (FC-Tree)	FC-DTree: The Flow Classification Decision Tree, allows users to actually view the flow classification decision tree, after running a simulation successfully. This classification tree, shows the user, the decisions (or decision path) CORMIX took and how CORMIX actually predicted a flow class for a particular input case. Please note, an active internet connection is required to access this functionality.
CorPlot 2d Graphs and Deposition Plotter	The new CorPlot graphing tool will provide detailed deposition plots based on CORMIX simulation results from a drill cuttings and muds discharge modeling study Please review the CORMIX Feature Comparison Table for application availbility.
CorVue 3-D Graphics	CorVue is a 3D plume visualization tool. Visualizations are based on CORMIX predictions. For more info, go to the CorVue User Guide Please review the CORMIX Feature Comparison Table for application availbility.
CorVue for CorJet Visualizations	CorVue produces visualizations for prediction files (*.OUT) produced by the CorJet Post-Processing Tool. Visuals are based on CorJet predictions. Please review the CORMIX Feature Comparison Table for application availbility.
CorSens	CorSens is a sensitivity analysis tool that can run up to ten separate CORMIX simulations at once. For addiontal info, visit the CorSens User Guide Please review the CORMIX Feature Comparison Table for application availbility.
CorTime & CorTime Graphs	CorTime is a tool implemented in CORMIX which allows for the automated calculation of time series data. Using CorTime, one can perform time series analysis due to time varying ambient conditions or discharge characteristics. CorTime is an automated tool for linkage of CORMIX to set boundary conditions in far-field coastal circulation models. Installed in all versions E/G/GT/GTH/GTS/GTD and GTR(../Post subdirectory) but currently available only in GTR versions
CorVal - Case Validation	Links the user to an online site where they can compare/validate the results of their simulations with the results of many other validation and experimental studies. CorVal helps clients to validate their results against our Validation database in order to determine the correctness of the CORMIX model and their studies. Not available and disabled in CORMIX v7.0E, Evaluation version. Please review the CORMIX Feature Comparison Table for application availbility.
CORMIX Benchmark Site	Links the user to the online CORMIX-CorJet Benchmark Site at http://www.mixzon.com/benchmark/.
Help Menu:
About CORMIX	Provides the user with CORMIX version information, system details, and licensing information like LicenseID, Session Code, ComputerID and lease duration, if applicable.
CORMIX Updates	Connects the user to the CORMIX Online Update Service.
CORMIX User Manual	Loads the PDF CORMIX User Manual installed in the /docs subdirectory of the CORMIX installation.
CorHelp - Online User Guide	Links to this web based CORMIX UI help and guide.
General User Tips	Opens a "Getting Started" guide giving the user general tips on how to use the CORMIX use interface.
CorDocs - Online Technical Docs.	Links to the hyperlinked, webbased CORMIX 1/2/3 Technical reports.
Gallery of Mixing Processes	Connects to the Online mixing process gallery, which consists of a series of images and photos explaining different mixing processes. Published at http://www.cormix.info/picgal/.
CORMIX FAQ	Links users to CORMIX Frequently Asked Questions web page. Published at http://www.cormix.info/faq.php.
CORMIX Glossary	Links the user to CORMIX Glossary of Terms web site. Published at http://www.cormix.info/glossary.php.
CORMIX Home	Links users to the to the CORMIX Home web site at http://www.cormix.info
MixZon Inc Home	Links users to the to the MixZon Inc Home web site at http://www.mixzon.com
MixZon - Outfall Monitoring Services	Links users to the to the MixZon web site at http://www.mixzon.com/monitoring/, that describes MixZon's services related to outfall monitoring, analysis and design using various remote sensing techniques.
Mixzon FAQs	Links users to the to the MixZon FAQ web site at http://www.mixzon.com/faq.php.
BrineDis Project	Links users to the to the BrineDis: Environmental planning, prediction and management of brine discharges from desalination plants project web site at http://www.brinedis.net.ms/.
Request Tech. Support	Links to an Online support request submission form, where users can submit their CORMIX related support questions. Not available and disabled in CORMIX v7.0E, Evaluation version.
Report CORMIX Bug	Links to an Online bug report form, where users can submit any bugs/defects they have discovered/found while using CORMIX software. Not available and disabled in CORMIX v7.0E, Evaluation version.
Suggestion Box	Sends the user to an Online Suggestion form, where you can report your valuable suggestions/feedback for improvements in CORMIX software and services.
MixZon Inc - My Account	Connects the user to the MixZon Inc - Online Account Management site. Our clients can login to this site using their MixZon account information (username and password) and modify their contact information, communication preferences, view their product download history, licesning history and any support tickets that they may have had along with a complete history of all relevant communication related to such support tickets.