CORMIX v7.0 Data Input Pages/Tabs

Fig. 1 CORMIX Data Input Pages/Tabs

Data Input Pages/Tabs:

Project:
The project tab holds the project identification information, as well as project notes. (Fig.2)
Fig. 2 Project Page Tab
Effluent:
The effluent tab holds the data that is used to specify the conditions of the effluent being discharged. (Fig.3)
Fig. 3 Effluent Page Tab
Ambient:
The ambient tab is used to input the ambient data or ambient discharge conditions. (Fig.4)
Fig. 4 Ambient Page Tab
Discharge:
The discharge tab holds the discharge specifications or configuration. One can use the CorSpy tool to visualize this configuration and check/verify if the discharge configuration has been specified correctly.(Fig.5)

Use the CORMIX1 tab for specifying Single Port Dischange configurations.

Use the CORMIX2 tab for specifying Submerged, Multiport Dischange configurations.

Use the CORMIX3 tab for specifying Surface Dischange configurations.
Fig. 5 Discharge Page Tab
Mixing Zone:
The mixing zone tab is used to input the mixing zone specifications or requirements. (Fig.6)
Fig. 6 Mixing Zone Page Tab
Output:
The output tab helps the user to select the reports/outputs that he/she prefers to view, print or both. (Fig.7)
Fig. 7 Output Page Tab
Processing:
The processing tab holds the processing record as well as the buttons to run the simulation. (Fig.8)
Important diagonsitic information and simulation progress information are displayed here.
Fig. 8 Processing Page Tab